202A QUALITY 1 Hole D-Rings Zinc Plated Bag of 500
The simple, neat and strong anchor for cord.
Fix them to the frame moulding, using a pan head screw, 6 x 3⁄8″ or similar.
Alternatively fix them to the backing board. Do this with a bifurcated rivet ‘B’ (slow) or, a two-piece rivet (faster) or use self-piercing rivet with the ‘PG MiniQuick’.
Overall height: 28mm
D diameter: 1.9mm
Strap thickness: 0.36mm
Screw hole diameter: 4.1mm
Gap between the ends of the D: 1.35mm
Takes No.6 gauge / 3.5mm diameter screws
202A 1 Hole D Ring Zinc plated, pack of 500
640 Nickel plated, pack of 100
Safe working load, based on our tests: 8kg
We have an in-house purpose-built load testing rig so you can be more certain of the safe load carrying capacity of any frame hardware from Lion.
SWL – Red handle icon giving a tested safe load figure which is derived from actual test results on our rig. Typically between 25% and 33% of the load at failure.
ESWL – White handle icon shows an estimated safe load figure based on our experience and best judgement.