Hanger 6926A




SKU: Hanger 6926A Categories: ,


6926A CWH2 Square Micro-Sawtooth Hanger Pack 50

To help hang frames quickly and safely. CWH2 is for frames with flat or papered backs. Can be used either way around.

With CWH hangers fitted in pairs, a frame will hang on almost any nail, pin, screw or hook Slots for frame level adjustment. Fix with pan-head screws, length to suit, not included.

All our CWH Hangers now have an on-trend silver nickel finish.

Safe working load, based on tests on our in-house rig: 6kg, when used in pairs

Use CWH Micro-sawtooth Hangers in 4 easy steps:

1  Fix CWH Hangers to the frame – Position and mark approximately 1/3 down from the top of the frame. Put one screw in an oval hole of each.

2  Position and fix the wall hooks – Using the frame as a guide place two post it notes in approximate hook positions, then measure and mark pin positions.

3  Trial hang the frame – hang on the hooks and check for general positioning. To adjust levelling ease a screw in a slot. Lock CWH hangers into position by inserting a second screw in each.

4  Hang the frame – with CWH Sawtooth Hangers frames hang flat and level on the wall and do not tip forward. Always use frame bumpers


There are no reviews yet.

Be the first to review “Hanger 6926A”

Enquire about Hanger 6926A

    Your Name (required)

    Your Email (required)


    Your Message

    You may also like…


    Click to view our delivery routes


    From our Trade Counter


    Contact Us For Bulk Discounts